Before start the repairs to your pool filter pump, may to disconnect all energy source sources. Possess a record that you lock out and tag the main circuit buster. This is one more safety precaution, that can prevent any injuries due to someone accidentally turning the breaker on.
The stationary portion with the seal is in the recess on the seal plate located to your motor range. To remove it, you always be turn the seal plate over. The stationary portion
on the seal now is facing affordable. Place the tip of a flat screw driver on the rear of the seal and gently tap it off.
Step 1 : Spring-Side shaft seal We all need to place your new shaft seal assembly in place. We recommend using the Ough.S. Seal PS-1000 shaft seal as it is more readily available than the polaris booster pump (what is it worth
) P55 Shaft Seal, and it is usually cheaper and just as high a quality. First, we need to put the spring side of the shaft seal into the bracket. Place bracket on the flat surface face up and make sure to clean the seal-seat counter-bore with your towel before setting the shaft seal into position. With the shaft seal in position, you is going to apply even pressure to it. Take your 1" PVC pipe coupler as well as put it all over shaft seal with it resting onto the lip within the shaft seal. Tap the PVC pipe coupler lightly with whether or not mallet together with side with the hammer up until shaft seal is firmly in install.
This regarding seal may be made out of a theme for any machine in any settings the two areas that must be closed are molded into. In order to quit the lubrication fluids from seeping out the two surfaces which bond in machinery need a seal.
With outdated mechanical seal completely removed, inspect the pump shaft and sleeve along that's not a problem seal recess for spoil. There are times when maybe you have to replace the pump shaft that is another repair within by itself.
If every person necessary to remove the cam (e.g., to change a wear plate), loosen the cam retaining screw, tap the screw prior to the cam breaks loose, then remove the screw and cam Clean all surfaces of sealing compound.
Motor. Maintain motor in a downward tilted, running position and recover with the motor pay for. Do not use a plastic cover which will trap moisture against your motor. Instead, use a cloth or canvas boat tarp use the printer allow the motor to breathe.
Support the pump body on handful of blocks of wood and tap out the shaft, hitting it on its impeller end. Be especially careful not to burr or flatten the end of the canal. It is best to use a block of wood one of the hammer as well as the shaft, rather than to hit the shaft directly.